McIntosh D150

In stock

Where to buy

Details

The D150 Digital Preamplifier expands McIntosh’s digital music capabilities by supporting many of the newest digital audio formats such as DSD and DXD. A USB input accepts up to 32-bit/384kHz signals and supports DSD64, DSD128, DXD 352.8kHz and DXD 384kHz. Two coaxial and two optical inputs accept up to 24-bit/192kHz signals. It is a simple solution to add the latest digital music formats to your existing system.

 

Balanced and unbalanced connections are available for both variable and fixed volume audio outputs, providing flexibility in setting up and connecting your system. Or simply add an amplifier, a pair of speakers and a digital source for a complete digital based stereo system. For enjoying SACDs, the unique MCT input connects to select McIntosh models with a MCT output – like the MCT500 SACD/CD transport – to deliver the purest possible sound quality. It’s also flexible enough to be used as a headphone amplifier; just connect your digital sources and a pair of headphones, such as the MHP1000 (not included), for a personal listening experience.

 

The D150 uses the same revered DAC that was found in the D100, featuring an 8 channel, 32-bit, 500kHz D/A converter with wide dynamic range and extremely low distortion. Eight channel D/A converter is used in stereo Quad Balanced mode. Music at all levels is reproduced with extreme precision and elegance. A 1/8” mini jack is provided for control data from the data output jack of a McIntosh preamp or A/V Control Center. It shares the classic façade, knobs and handcrafted black-glass front panels as all other McIntosh components in a small form factor of just under 4″ in height.

Specifications

ELECTRONIC SPECIFICATIONS

Total Harmonic Distortion:  0.0015%

Frequency Response:  +/-0.5dB from 4Hz to 20,000Hz, +0.5/-3dB from 4Hz to 68,000Hz (Source dependent)

Maximum Volts Out (Balanced / Unbalanced):  16/8 V RMS

Input Impedance (Balanced / Unbalanced):  N/A

Phono Voltage Gain:  N/A

High Level Voltage Gain:  N/A

Signal To Noise Ratio:  110dB

Dual Mono Power Supply:  No

Dual Mono, Fully Balanced:  Digital, Fully Balanced

 

CONNECTIVITY

Balanced Input:  0

Unbalanced Input:  0

Phono Input Moving Coil:  0

Phono Input Moving Magnet:  0

Digital Coaxial Input:  2

Digital Optical Input:  2

Digital MCT (DIN) Input:  1

Digital USB Input:  1 (2.0, 32/192 Asynchronous), 44.1kHz to 384kHz, 32-Bit (PCM) DSD64, DSD128, DXD352.8kHz, DXD384kHz

Digital AES/EBU Input:  0

Balanced Fixed Output:  1 Stereo

Balanced Variable Output:  1 Stereo

Unbalanced Fixed Output:  1 Stereo

Unbalanced Variable Output:  1 Stereo

Headphone Output:  1/4″ High Drive

Record Processor Loop:  No

Input Level Match:  No

Home Theater PassThru:  No

Unbalanced Analog Connector Type:  Standard

CONTROL

Tone Controls:  No

Tone Bypass and Input Assign:  No

RS232 Control Input:  No

Power Control Output:  1

Rear Panel Data Port:  1

Rear Panel IR Sensor Input:  Yes

GENERAL SPECIFICATIONS

Multi-Chassis or Single:  Single

Output Meters:  No

Vacuum Tube or Solid State:  Solid State

Power Consumption (On):  30 watts

 

WEIGHTS & DIMENSIONS

Dimensions:  Width: 17.5″ (44.45cm), Height: 3-7/8″ (9.8cm), Depth: 16″ (40.64cm)

Weight:  13.5 lbs (6.1kg)

Shipping Weight:  28 lbs (12.7kg)

 

Product Sheet